|
|
- Recommended settings for PETG? (re: OVERTURE brand PETG)
I'm using an Ender 3 (upgraded to Capricorn PTFE tubing and other upgrades) and I'd like to try printing PETG More specifically, I've purchased a roll of the OVERTURE PETG The manufacturer recommends: Nozzle Temp: 230 - 250 Bed Temp: 80 - 90
- What Are the Optimal Settings for Overture PETG? (Detailed)
Here are the optimal settings for Overture PETG, as recommended by the manufacturer: Nozzle (Print) Temperature – 230 to 250 degrees Celsius Bed Temperature – 80 to 90 degrees Celsius
- Overture PETG settings - Bambu Lab Community Forum
Your petg flow should be around 95 to 98 range with most petg filaments set it to 96 and run a calibration flow test PA 0 02 to 0 05 range should be in Also do all your calibrations on a smooth bed plate
- The PETG Print Settings for Perfect Results - All3DP
Find the perfect PETG print settings for your needs by adjusting temperature, stringing, print speed, and retraction settings!
- PETG Print Settings: Temperature, Speed, and Retraction - CREALITY CLOUD
PETG generally prints best within a temperature range of 220°C to 260°C Many experts recommend starting with a nozzle temperature of 230°C for the first layer and 240°C for the subsequent layers
- I Finally Got Overture PETG To Print : r BambuLab - Reddit
Looking around online, many suggest 4-10, usually around 8 or 10 for the max speed setting for PETG First layer is missing filiment It's either not adhering, or you're printing too fast
- Looking for the best settings for printing with PETG
You’ll likely get better results if you use a PETG filament that’s rated for high speed printing (300mm sec minimum, but generally the higher the speed rating the better) The same for other filament types also, if you can find it
- How to 3D Print PETG Filament Like a Pro – Ultimate Guide FAQ
To 3D print PETG, you should use a printing temperature between 235-250°C and a bed temperature between 70-100°C for the best results Your cooling fan should be at 100%, with a print speed of 40-60mm s Also, PETG absorbs moisture easily so, keep it dry in an airtight container when not in use
- PETG First Layer Settings using Overture PETG - Prusa3D Forum
I'm using the generic PETG settings in PrusaSlicr which uses a temp of 230 The parts printed fine and look excellent except the first layer of most parts has a very smooth finish on one portion and visible lines on the rest that you can feel when you run a fingernail across them
|
|
英文每年常用名排名
2023 年排名
2022 年排名
2021 年排名
2020 年排名
2019 年排名
2018 年排名
2017 年排名
2016 年排名
2015 年排名
2014 年排名
2013 年排名
2012 年排名
2011 年排名
2010 年排名
2009 年排名
2008 年排名
2007 年排名
2006 年排名
2005 年排名
2004 年排名
2003 年排名
2002 年排名
2001 年排名
2000 年排名
英文名字起源
希伯来
希腊
条顿
印度
拉丁
拉丁语
古英语
英格兰
阿拉伯
法国
盖尔
英语
匈牙利
凯尔特
西班牙
居尔特
非洲
美洲土著
挪威
德国
威尔士
斯拉夫民族
古德语
爱尔兰
波斯
古法语
盎格鲁撒克逊
意大利
盖尔语
未知
夏威夷
中古英语
梵语
苏格兰
俄罗斯
土耳其
捷克
希腊;拉丁
斯干那维亚
瑞典
波兰
乌干达
拉丁;条顿
巴斯克语
亚拉姆
亚美尼亚
斯拉夫语
斯堪地纳维亚
越南
荷兰
|